Cartridge Filters

Cartridge Filter Equipment

MODEL	SIZE AND WEIGHT	RATE (bpm)	PHOTO
S CFH 3P 15/3 100 S4 DOE	2-1/2' x 2-1/2' x 4-1/2'; 750#	5
D CFH 3P 15/3 125 S4 DOE	3' x 5' x 6'; 1500#	10
D CFH 4 S/P 40/3 100 S4 DOE	4' x 5-12/' x 6'; 2500#	15
T CFH 6-8P 12/38 100 S4 226	7' x 9-1/2' x 8'; 6500#	75
Q CFH 6-10P 12/38 100 S4 226	6-1/2' x 14' x 7'; 8500#	75
W CFH 2F 9/3 1000 CS DOE	50" x 24"; 550#	3
D WCFH 5/3 800 S4 DOE/222	3' x 4' x 5'; 1000#	2.5

NOMENCLATURE:

Housing indicated as follows:
S-Single D-Dual T-Triple Q-Quad

Piping Size: 3 - 3", 4 - 4", etc.
Manifolding: P-Parallel S/P-Series Parallel
Cartridges per housing: 12, 15, 19, etc.
Length of cartridge: 3 - 30", 4 - 40"
Pressure Rating: 100 psi, etc.
Material Construction: S4 - stainless steel 304; S6 - stainless steel 316; CS - carbon steel
Cartridge Seal: DOE - double open end; 222 - 222 o-ring; 226 - 226 o-ring

Cartridge Filters

Pleated Absolute Cartridge Filters

Filtration sizes down to 0.2 micron with 99.99% efficiency
rating is available in 30" or 40" length, 2-1/2"OD pleated
cartridges. Various suppliers manufacture a wide range
of cartridge filters to filter 0.2 to 100 micron in nominal
and absolute rating.

Stringwound Nominal Cartridge Filter

Part No.: GF SW xx – 30 P P D

Type: Nominal, continuous wound cartridge

Filter Media: Polypropylene

Media Maximum Temp.: 180 F

Core Material: Polypropylene, 1” ID perforated core

Core Maximum Temp.: 180 F

Micron Rating: 1 to 80 Micron

Maximum Flow Rate: 12 gpm at the viscosity of water

Clean Pressure Drop: 1 - 3 PSI

Change Pressure Drop: 18 – 20 PSI

Configuration: Double open end

Size: 2-1/4”OD, 30”L + or – 1/16”,

740 Cartridge

740 Platinum Series absolute rated filter cartridge has a unique design that uses
segregated flow channels and flow chambers to maximize the effective surface
area of the pleated filter media within a 6.25 inch OD cartridge.

One 740 Platinum Series filter is designed to have the dirt holding capacity of
10 standard 2.5 inch OD pleated cartridges of similar length. Available in a wide
variety of filter media, this cartridge can be constructed with metal end caps and
core for high temperature applications.

With a recommended flow rate of 40 GPM, this GFI Platinum Series filter is the
solution to achieving optimum performance while minimizing filtration cost.

Filter Efficiency

Information provided by FTC, Houston, TX